BSC1

BSC1 multi-pattern , small condenser studio microphone stereo kit.
Traditional shape and clean sound make BSC1 suitable for recording various instruments in concert halls, theaters and the controlled studio environments. These microphones feature the highest quality electronics components and wiring to achieve the desired sound quality that we strive for at Busman Audio. We use van den Hul internal wiring to give the ultimate signal transfer. These microphones also come in the custom Sierra Yellow paint for a striking finish that commands attention. The BSC1 has two switches: the 10dB attenuation switch and the low frequency roll-off switch on it's body. The BSC1 features four directional characteristics capsules: cardioid(K1), omni-directional (K2), hyper-cardioid (K3), and wide-angle cardioid(K4), . They are exchangeable to meet different environments and needs. We are confident that you will find this microphone to be one of your go to mics for all types of recording.

These microphones come with a 3 year warranty against defects from manufacturing.

Specifications
Polar Patterns: Omnidirectional, wide-angle cardioid, cardioid, hypercardioid
Frequency Response: 30Hz~20KHz
Sensitivity: (@ 1000Hz, 94dB S.P.L) 9mV/Pa 10mV/Pa
Rated Impedance: < 200 ohms
Equivalent Noise Level: 17dB (A weight) Max SPL for 0.5% THD@1000Hz 128dB 138dB with -10db pad
Power Requirement: 48 Phantom Power

Download Printable Overview (PDF format)

$450.00 stereo kit USD

back to microphones