The BSCS-M is a large diaphragm microphone comprised of two separate odd-membrane solid state microphones contained within a single housing. Its capsules are mounted in close proximity on a vertical axis. The upper capsule assembly has the ability to rotate 270 degrees horizontally, relative to the low capsule.
The BSCS-M is the combination of capsule articulation which allows a user of the BSCS-M to achieve all manners of cardiod coincident pair stereophonic recording techniques. Due to the close proximity of the capsules, there is no phase cancellation resulting from time delay between the two signals. This translates into excellent mono compatibility.
The BSCS-M uses the large (1 inch) odd-membrane capsule. These are independently coupled through low-noise amplifier based on a class A FET driven discrete the OTL balanced output stages. These are wired with van den Hul internal wiring and use the highest quality electronics to provide the ultimate sonic detail.
Included with the BSCS-M microphone are a dedicated 5-pin XLR cable, power supply, foam windscreen, special shock-mount and aluminum carrying case. This mic can also be powered with phantom power instead of the power supply.
Type: Stereo Condenser Microphone with Vertically Coincident, Odd Diaphragms
Polar Pattern: Cardioid
Frequency Response: 30-20000Hz
Rated Impedance: 200ohm
Maximum SPL: 136dB for 1% T.H.D.
Equivalent Noise Level: 16dB (A weight IEC 651)
Download Printable Overview (PDF format)
back to microphones